Table of Contents
Advertisement
other important features
Over-temperature trip device
The fryer is fitted with a manually resettable over-temperature trip device. This is a safety
feature that will switch off your fryer if it becomes too hot, or if there is too little or no oil
present.
Switch off and unplug the fryer and allow the product to cool down completely. The
reset button is located on the rear of the control panel. Press the button upwards to reset
the trip device. Fill with new clean oil above the MIN mark and not exceeding the MAX
mark then, plug the appliance back in.
RESET BUTTON
Cool zone
There is a cool zone area below the element that ensures that any stray pieces of food
which have dropped to the bottom will not burn and contaminate the oil. After cooking wait
until the oil has cooled completely then drain the oil to remove the scraps.
Advertisement
Table of Contents
