JVC GZ-R315 Detailed User Manual page 42

Recording
5
Tap to select a recording interval (1 to 80 seconds).
.
If the icon is not displayed on the screen, tap 1 to scroll the screen.
0
The greater the number of seconds, the longer the recording interval.
0
Tap L to exit the menu.
0
Tap J to return to the previous screen.
0
6
Start recording.
.
A frame is taken at intervals of the selected period.
0
When the recording interval is set to "20SEC INTERVAL" or higher,
0
this unit switches to the power-saving mode between recordings.
At the next point to record, the power-saving mode will be turned off
and recording will start automatically.
Settings of Time-Lapse recording are not saved when the power is
0
turned off.
Indications During Time-Lapse Recording
.
Display
A Recording interval Displays the recording interval that is set.
B Recorded Time Displays the actual recorded time of the video.
Recorded time increases in units of frames.
C Actual Elapsed Displays the actual elapsed time after
Time recording starts.
D Remaining Remaining time left to record with the currently
Recording Time selected video quality.
42
Description
Time-Lapse Setting
The greater the number of seconds, the longer the recording interval.
Setting
OFF Deactivates the function.
1SEC INTERVAL Takes a frame at 1-second intervals.
Recorded videos will be played back at 30 times
speed.
5SEC INTERVAL Takes a frame at 5-second intervals.
Recorded videos will be played back at 150 times
speed.
20SEC INTERVAL Takes a frame at 20-second intervals.
Recorded videos will be played back at 600 times
speed.
80SEC INTERVAL Takes a frame at 80-second intervals.
Recorded videos will be played back at 2 400 times
speed.
Caution :
During the time-lapse recording, video quality is set to XP mode.
0
Audio cannot be recorded during time-lapse recording.
0
When recording is stopped with the recorded time less than "0:00:00:14",
0
the video will not be saved.
Zooming, simultaneous still image recording, and image stabilizer are not
0
available in time-lapse recording.
When Time-Lapse recording is set, you cannot record still images.
0
Memo :
Settings of time-lapse recording are reset when the power is turned off.
0
To start time-lapse recording again, it is necessary to make the selection
once more.
Recording stops automatically 99 hours after it is started.
0
Make use of a tripod and AC adapter for time-lapse recordings with long
0
intervals.
It is also recommended to fix the focus and white balance manually.
"Tripod Mounting" (A p. 18)
Details