Table of Contents
Advertisement
present, see the section
on page 19
When shipped, the system cabinet is tied to the pallet beneath it.
The pallet has a clearance for a pallet jack to move the unit. When
moving a system cabinet, follow these guidelines:
1. Verify that the unpacked cabinet is still secured to the pallet.
2. Use a pallet jack to move the cabinet on its pallet to the
installation site.
!
C A U T I O N
Use a pallet jack to move the packaged cabinet,
not a forklift. Using a forklift could damage the
cabinet or a system. Use the pallet jack at the
front or rear of the cabinet.
3. Position the cabinet pallet so that it has the clearances shown
in
Figure
4.
Unpacking and Checking the Cabinet
Unless you have a service agreement that includes installation of
the system, you need to unpack the cabinet.
To unpack the cabinet
•
Make sure you have the correct tools.
•
Remove the packing materials.
•
Check the cabinet and system.
•
Verify the system serial numbers.
•
Remove the cabinet from its pallet.
"Stabilizing the Systems"
for stabilization guidelines.
-7-
Advertisement
Table of Contents
