NEC 320Fc User Manual page 81

N O T E
Before installing any software, ensure that you are
working on the Upgrade Side desktop (through a
remote
Production Side.
To apply the downloaded updates
1. Click the Automatic Updates icon in the Upgrade Side system tray to display the
Automatic Updates dialog box.
2. Select Custom Install and click Next.
The next page displays a list of the updates you downloaded and allows you to
select which ones to install at this time.
3. Select only the updates that you previously checked for compatibility with your
Express5800/320Fc system, then click Install.
During the installation process, the Automatic Updates dialog box minimizes to the
system tray. When the installation is complete, you can display the dialog box again. It
should report that all updates were successfully installed.
Some updates might require you to restart the operating system on the Upgrade Side.
You can click Restart Now to allow Automatic Updates to restart the Upgrade Side
automatically, or you can manually restart later. You can restart the Upgrade Side as
many times as necessary to complete the installation.
See "Restarting the Upgrade Side" on page 4-12
the Upgrade Side after you restart it.
Related Topics
•
"Software Upgrade Support" on page 2-1
•
"Managing Upgrade Tasks on the Upgrade Side" on page 4-5
•
"Viewing Active Upgrade Process Status" on page 4-21
•
"Merging the System" on page 4-15
•
"Aborting the Upgrade" on page 4-19
•
Troubleshooting
connection). Do not install software on the
Splitting the System
for information about reconnecting to
Performing the Upgrade 4-11