Timer Recording Using The On-Screen Display - NEC VH-602 User Manual

Timer Recording Using the On-Screen Display

The VCR can be programmed to record up to 7 programmes within a period of 1 month. For unattended recording,
the timer needs to know the channel to be recorded and the time to start and end.
Before You Start
If you make an incorrect entry during programming, press CURSOR (
If no entry is made for approximately 3 minutes during programming, the On-Screen menu will revert to the TV
screen automatically
1
2
3
OK
4
OK
Turn on the VCR and set the TV to the video channel.
Press i on the remote control. The following menu will appear on the TV screen:
REC
PR
f
OSD OSD
ON
AUDIO OFF
NOTE:
The clock time must be set before setting the programme timer. If the clock time
has not been set, the display will change to the clock menu. Now you can set
the clock.
Press cursor ( F F / G G ) to select "REC" and press OK.
PR
- -
- -
- -
- -
- -
- -
- -
Press OK to enter the timer programming mode.
PR
- -
- -
- -
- -
- -
- -
- -
F F / G G ) to clear the entry. Then enter again.
A B
1 2
VCR
Pr-12 C
TIME SYS-
DR
ACMS
DATE TEM OSD
REC
OK i
OPR
DATE TIME
- - - - : - - ~ - - : - - SP
- - - - : - - ~ - - : - - SP
- - - - : - - ~ - - : - - SP
- - - - : - - ~ - - : - - SP
- - - - : - - ~ - - : - - SP
- - - - : - - ~ - - : - - SP
- - - - : - - ~ - - : - - SP
DELETE: , OK i
DATE TIME
- - - - : - - ~ - - : - - SP
- - - - : - - ~ - - : - - SP
- - - - : - - ~ - - : - - SP
- - - - : - - ~ - - : - - SP
- - - - : - - ~ - - : - - SP
- - - - : - - ~ - - : - - SP
- - - - : - - ~ - - : - - SP
i
33