Setting - NEC VH-602 User Manual

Setting the Video Channel on your TV
1
2
3
OPERATE
4
PLAY
5
6
OPERATE STOP/ EJECT
Child - Lock System
AV2
VIDEO IN L-AUDIO IN-R
CH
12
The output channel of the VCR is set at UHF channel 68.
Turn on the TV.
Turn the VCR on by pressing the OPERATE button.
Insert a recorded tape and press PLAY.
Tune your TV so that the picture of the playing tape appears on the TV screen.
NOTE: Refer to your TV user's manual when tuning the video channel.
If channel 68 is already occupied on your TV set, or the picture is distorted, you can
change the transmitted channel of the video recorder.
NTSC P
1.
During power off mode (only clock displayed) hold down both the "CH
"CH E E " buttons on the VCR for more than 4 seconds.
Then, "RF C68" will be displayed on the Multi-Function Display.
2.
Press either the "CH
channel, eg. between channels 28 and 67.
3.
Press the "OPERATE" button when you have finished.
D D E E
" or "CH " buttons on the VCR to select another video
D D
" and