Table of Contents
Advertisement
Special Playback
Still Playback
Frame Advance
Slow-motion Playback, Shuttle
NOTES:
If distortions can be seen in the picture, remove them with the CURSOR (
The slow-motion playback will only continue for about 30 secs, after that the video recorder will return to the normal
playback mode to avoid damage of the tape.
While using the special playback effects (picture/logic search or still or slow-motion playback) with the tape record-
ed in LP mode, there will be a loss of colour and there may be noise bars in the picture.
26
Press P/STILL to freeze the picture during playback. To continue normal play-
back, press PLAY.
When the picture is still, unstable noise bars may appear on the TV screen
and no sound will be heard. This is normal.
Use CURSOR (
D D
/
E E
) to eliminate vertical jitter.
If the VCR is left in pause/still mode for more than 5 minutes, the VCR will be
reset automatically to stop mode to protect the tape and the video heads.
During still mode, press P/STILL to advance the picture one frame at a time.
To continue normal playback, press PLAY.
(By Using the Remote Control)
During normal playback or still playback, slow-motion shuttle control can be acti-
vated by pressing CURSOR (
The playback speed will be changed as below:
-7 x play, -3 x play, -play, still, 1/19 slow, play, 2 x play, 7 x play.
To switch off slow-motion, press either of the desired function
buttons e.g. playback, search, still picture or stop.
F F
/
G G
).
D D
E E
/
) buttons.
Hide quick links:
Advertisement
Table of Contents
