NEC VH-602 User Manual page 8

1 OPERATE
2 MENU (i)
3 CLEAR
4 CURSOR ( E E D D F F G G )
5 TRACKING (TRK)
6 PLAY
7 REWIND/REVIEW (REW)
8 STOP
9 0 to 9
10 AUDIO/VIDEO MODE
(AV)
11 EJECT
12 REC/QSR
13 TAPE SPEED (Long Play)
14 OK
15 CHANNEL (CH)
16 PAUSE/STILL (P/STILL)
17 FAST FORWARD/CUE
(FF)
18 SKIP G G G G
19 TV/VCR
20 CHILD LOCK
8
Turns the unit ON or OFF.
Used to enter into menu on the TV screen.
Press to reset the counter to 0:00:00.
E E D D
During OSD menu, for moving the cursor, selection bar up or down.
Switches one channel programme up or down.
During playback, tracking control.
During still playback, adjusting vertical tremble.
F F G G
During OSD menu, for moving the cursor to the left or right.
Adjust the playback speed.
The cursor ( F F ) button can be used to clear data.
Used to adjust tracking manually.
Press to play back recorded tapes.
Press to start rewind.
Press this button during playback to see reverse playback picture at high speed.
Press to stop the tape.
These buttons are used to select programmes, or to set the clock and the
timer according to the guidelines displayed on the TV screen.
Used to select the input signal.
Press once: SC will appear on the Multi-Function Display. SC is selected to
record the video and normal audio signal from the built-in tuner, and the Hi-Fi
audio signal from AUDIO IN (L/R), VIDEO IN on the front panel.
Press twice: AV1 will appear on the Multi-Function Display. AV1 is selected to
record or view signals from AUDIO IN (L/R), VIDEO IN on the rear panel.
Press three times: AV2 will appear on the Multi-Function Display. AV2 is
selected to record or view signals from AUDIO IN (L/R), VIDEO IN on the
front panel.
Press four times: AV2 will disappear on the Multi-Function Display. You can
now watch or record signals from the built-in tuner.
Press to eject a cassette.
Press to record or to set the QSR (Quick Start Recording).
Used to select the desired recording speed: SP (Standard Play) or LP (Long Play).
Press while the clock is displayed to show the tape counter.
The tape position will be stored in memory.
Confirms menu selection.
Calls up OSD (On Screen Display).
Used to select channel numbers.
Press in RECORD mode to stop recording and to eliminate commercial
breaks or unwanted programme material.
Press again to resume recording.
Press in play mode to freeze the picture. Press PLAY to resume playback.
Press to activate fast forward.
Press this button during playback to see forward playback picture at high speed.
Used to fast forward picture search through 30 seconds of recording.
Set this button to;
VCR: To monitor, view playback or view the video recorder's tuner.
TV: To watch TV or view one programme while recording another programme.
NOTE: When you have set the TV/VCR button to TV mode, "VCR" indicator
will disappear on the Multi-Function Display.
Used to select child lock mode.