Selecting The Power Management Mode [Power Management Mode]; Issuing A Beep [Beep] - Canon SX50 User Manual

Selecting the Power
Management Mode
When the projector is not used, the
mercury lamp is turned off or the power is
turned off automatically for power saving.
System settings
Power management mode
The
Off
mode is not used.
The
Standby
power management mode. It
restarts projection when a
signal is input or an operation
button is pressed.
The projector enters the exit
Exit
mode,
automatically.
For details on Power Management
Mode, refer to P36.
70
power management
projector enters the
being turned off
Issuing a Beep
A beep can be sounded when the power
is turned on/off or a button on the top
control or remote control is pressed.
System settings
Beep
A beep is issued.
On
A beep is not issued.
Off
A beep is not issued when the
sound has been muted by pressing
the [MUTE] button.