Selecting A Menu Position - Canon SX50 User Manual

Selecting a Screen
Mode (2)
Select a screen mode according to the
size of the image to be projected.
Display settings
Screen settings
uto
The screen mode is automat-
ically switched between [Nor-
mal]
depending on the image from
the AV equipment. This item
is displayed when Compo-
nent Input is selected to
allow you to select it.
ormal
An image is projected at a
16:9 (W:H) aspect ratio (wide
screen size).
ide Screen
An image is projected at a
4:3 (W:H) aspect ratio (nor-
mal screen size).
The upper, lower, left, and/or right
portions of a projected image may be
missing depending on the selected
display mode.
58
and [Wide Screen]
Selecting a
Menu Position
You can select the position of the menu
displayed on the screen.
Display settings
Menu position
Using [^], [<], [>], and [v] buttons, move
the menu position.
When the menu
determined, press the [OK] button
(the menu will disappear 30 seconds
later if no button is pressed).
position is