Installing the Lens Cap
Install the lens cap in the following manner:
Pass the supplied string through the lens cap
string hole on the bottom of the projector, and
then pass the other end of the string in the hole on
the lens cap.
Optional Parts
• Lamp
• Ceiling Attachment
• Ceiling Pipe (360 mm / 14.2")
• Ceiling Pipe (550 mm / 21.7")
• Ceiling Pipe (760 mm / 29.9")
• Ceiling Plate
• Mac Adapter
• DVI Cable
* This part is used to hang the projector from a high ceiling.
** This part is used to join the ceiling pipe and the ceiling attachment.
For more information, refer to the instruction manual that comes with the ceiling
attachment RS-CL01.
92
Part No.: RS-LP01
Part No.: RS-CL01
Part No.: RS-CL03*
Part No.: RS-CL04*
Part No.: RS-CL05*
Part No.: RS-CL02**
Part No.: LV-AD02
Part No.: LV-CA29