Connecting To A Computer - Telefunken DPF 9323 Instruction Manual

- Brightness
Select "Brightness" using the "Up/Down" keys on the remote
"Left/Right" keys to adjust the brightness level (1-16).
- Contrast
Select "Contrast" using the "Up/Down" keys on the remote
keys to adjust the contrast level (1-16).
- Saturation
Select "Saturation" using the "Up/Down" keys on the remote
"Left/Right" keys to adjust the saturation level (1-16).
- Tint
Select "Tint" using the "Up/Down" keys on the remote and
to adjust the tint level (1-100).
- Reset(Default)
If the frame is handled incorrectly, it may be useful to reset its default settings. To do so, select "Default"
using the "Up/Down" keys on the remote and pr
"Off".
Note: After Resetting, the language selection screen will appear during the following start-up, just as it did
for its first use.
- Version number of the internal software (for information only)
V.

Connecting to a computer

It is possible to transfer files to the frame by connecting it to your personal computer. To do so, connect
your frame via USB cable (mini-USB port on the frame, and standard USB port for the computer) to the
computer, then turn on your frame: the frame's screen will show "PC connection..."
operation after disconnecting.
On your computer, the following dialog box will appear:
Non contractual document subject to change in case of typographical errors (Mktg1011)
Enter
Enter
Enter
Enter
Enter use "Up/Down keys to select "On" or
COPYRIGHT SOPEG 2011
"Left/Right"
"Left/Right" keys
Return to normal
10