unrestricted throughout the whole range
with no binding or excessive free play.
Operate the throttle levers several times to
●
make sure there is no hesitation in their
travel. Operation should be smooth over
the complete range of motion, and each le-
ver should return completely to the idle po-
sition.
Look for loose or damaged connections of
●
the throttle and shift cables under the en-
gine cowling.
EMU36481
Engine shut-off cord (lanyard)
Inspect the engine shut-off cord for damage,
such as cuts, breaks, and wear.
1. Engine shut-off switch
2. Cord
3. Clip
1. Cord
2. Clip
1
2
3
ZMU02941
3. Engine shut-off switch
EMU27120
Oil
Check to be sure you have plenty of oil for
●
your trip.
EMU27140
Engine
Check the engine and engine mounting.
●
Look for loose or damaged fasteners.
●
Check the propeller for damage.
●
EMU36952
Install cowling
1.
Be sure that a cowling lock lever is re-
leased.
2.
Be sure that the rubber seal is seated all
the way around the engine.
3.
Place the cowling on top of the seal.
4.
Check to be sure the rubber seal fits cor-
rectly all the way around the engine.
5.
Move the lever to lock the cowling as
shown. NOTICE: If the cowling is not
installed correctly, water spray under
the cowling can damage the engine,
or the cowling can blow off at high
speeds.
[ECM01990]
After installing, check the fitting of the top
cowling by pushing it with both hands. If the
top cowling is loose, have it repaired by your
Yamaha dealer.
Operation
ZMU06109
30