For Your Safety; Overview - Bosch MUM44 Series Operating Instructions Manual

For your safety

General safety instructions
oáëâ=çÑ=ÉäÉÅíêáÅ=ëÜçÅâ>
Connect and operate the appliance only
in accordance with the specifications
on the rating plate. Only use indoors.
Do not use the appliance if the power cord
and/or appliance are damaged.
Keep children away from the appliance.
Do not allow persons (also children) with
restricted physical sensory perception
or mental abilities or with lack of experience
and knowledge to operate the appliance unless
they are supervised or have been instructed
in the use of the appliance by somebody who
is responsible for their safety.
Always pull out the mains plug after using
the appliance, before cleaning the appliance,
before leaving the room or if a fault occurs.
Do not leave the running appliance unattended.
Do not place the power cord over sharp edges
or hot surfaces. To prevent injury, a damaged
power cord must be replaced by the manufac-
turer or his customer service or a similarly
qualified person. Only our customer service
may repair the appliance.
Safety instructions for this appliance
Keep hands clear of rotating parts.
For reasons of safety the appliance may only
be operated when unused drives have been
covered with drive guards (4, 7).
Do not adjust the swivel arm while the appliance
is switched on. Wait until the drive has come
to a standstill.
Do not change tool/accessory until the drive
is at a standstill – when the appliance is swit-
ched off, the drive continues running briefly.
Do not immerse the base unit in water or clean
under running water.
Use the appliance with original accessories only.
When using the accessories, follow
the enclosed operating instructions.
Use only one tool or accessory at any one time.
Use only the rotary switch to switch the appli-
ance on or off.
The appliance restarts following a power inter-
ruption.
Robert Bosch Hausgeräte GmbH

Overview

Please fold out the illustrated
pages.
Base unit
1 Release button
2 Swivel arm
(see "Operating positions")
3 Rotary switch
0/off = Stop
/ P = Parking circuit
Hold rotary switch until the drive stops; tool
is in the swivel position. If the drive does not
move, the swivel position has already been
reached.
Settings 1–4 = Operating speed
Setting 1 = Minimum speed – slow
Setting 4 = Maximum speed – fast
If the power is interrupted, the appliance
remains switched on and restarts when
the power is restored.
4 Drive cover
To remove the drive cover, rotate until
the locking feature has been released.
5 Drive for
– continuous-feed shredder *
– citrus press *
– grain mill *
When not in use, attach the drive cover.
6 Drive for
– tools (stirrer, whisk, kneading hook)
– stirring tool of the ice-cream maker *
– folded down or up for mincer *
7 Blender drive cover
8 Drive for
– blender
– multi-blender
When not in use, attach the blender drive
cover.
9 Cord store (Fig. )
MUM 44..: Stow the cord
MUM 46../48..: Stow the cord in the cord
store
Bowl with accessories
10 Mixing bowl
11 Lid
Tools
12 Stirrer
13 Whisk
14 Kneading hook with dough deflector
Blender
15 Base
16 Blade insert
en
Fig. 
11