Asus DSL-N12HP User Manual page 8

Wi-Fi LED
Off: No Wi-Fi signal.
Solid green: Wireless system is ready.
Flashing green: Transmitting or receiving data via wireless connection.
LAN 1~4 LED
Off: No power or no physical connection.
Solid green: Has physical connection to an Ethernet network.
Flashing green: Transmitting or receiving data via wireless connection.
WPS and Wi-Fi on/off button
Press and hold this button more than 5 seconds to activate WPS. Ensure
that the WPS is enabled in Wireless > Security page).
Press and hold this button 2~3 seconds to enable/disable Wi-Fi.
ADSL port
Connect to a splitter or to a telephone outlet via an RJ-11 cable.
LAN 1 ~ 4 ports
Connect network cables into these ports to establish LAN connection.
Reset button
Press this button for 10 seconds to reset or restore the system to its factory
default settings.
Power button
Press this button to power on or off the system.
Power (DC-IN) port
Insert the bundled AC adapter into this port and connect your router to a
power source.
NOTE: Use only the adapter that came with your package. Using other
adapters may damage the device.
8