Click Apply/Save to save and activate the rule.
Field
Traffic Class Name
Rule Order
Rule Status
Classification Criteria
Class Interface
Ether Type
Source MAC Address
Source MAC Mask
78
Description
Enter a name for the traffic class.
Last is the only option.
Disable or enable the rule.
Select an interface (i.e. Local, eth0-4, wl0)
Set the Ethernet type (e.g. IP, ARP, IPv6).
A packet belongs to SET-1, if a binary-AND of its
source MAC address with the Source MAC Mask is
equal to the binary-AND of the Source MAC Mask
and this field.
This is the mask used to decide how many bits are
checked in Source MAC Address.