Asus DSL-N12HP User Manual page 47

Field
Enable RADVD
RA interval Min(sec):
RA interval Max(sec):
Reachable Time(ms):
Default Preference:
MTU (bytes):
Enable Prefix Length Relay
Enable Configuration Mode
Enable ULA Prefix Advertisement
Randomly Generate
Statically Configure Prefix
Statically Configure
Preferred Life Time (hour)
Valid Life Time (hour)
Enable MLD Snooping
Standard Mode
Blocking Mode
Description
Enable use of router advertisement daemon
Minimum time to send router advertisement
Maximum time to send router advertisement
The time, in milliseconds that a neighbor
is reachable after receiving reachability
confirmation
Preference level associated with the default
router
MTU value used in router advertisement
messages to insure that all nodes on a link
use the same MTU value
Use prefix length receive from WAN interface
Manually configure prefix, prefix length,
preferred lifetime and valid lifetime used in
router advertisement
Allow RADVD to advertise Unique Local
Address Prefix
Use a Randomly Generated Prefix
Specify the prefix to be used
The prefix to be used
The preferred life time for this prefix
The valid life time for this prefix
Enable/disable IPv6 multicast forward to LAN
ports
In standard mode, IPv6 multicast traffic
will flood to all bridge ports when no client
subscribes to a multicast group even if MLD
snooping is enabled
In blocking mode, IPv6 multicast data traffic
will be blocked and not flood to all bridge
ports when there are no client subscriptions
to any multicast group
47