Your Adsl Modem Router - Asus DSL-N12HP User Manual

1.3 Your ADSL modem router

Power LED
Off: No power.
Solid green: Device is ready.
Flashing green: Upgrade is in process.
Solid red: POST (Power On Self Test) failure (not bootable) or device
NOTE: A malfunction is any error of internal sequence or state that will
prevent the device from connecting to the DSLAM or passing customer
data. This may be identified at various times such after power on or during
operation through the use of self testing or in operations which result in a
unit state that is not expected or should not occur.
ADSL LED
Off: No ADSL link or unable to establish ADSL link.
Solid green: ADSL link is established.
Flashing green: ADSL is attempting to connect to a DSLAM.
Internet LED
Off: IP connected and no traffic detected (the device has a WAN IP address
from IPCP or DHCP is up or a static IP address is configured, PPP
negotiation has successfully complete.
If the IP or PPPoE session is dropped due to an idle timeout, the light
will remain Blue.
Solid green: Modem power off, modem in bridged mode or WAN
Flashing green: IP connected and IP Traffic is passing through the device.
DSL-N12HP 300Mbps
Wi-Fi ADSL Modem Router
malfunction.
connection not present.
The light will turn off when it attempts to reconnect and
DHCP or PPPoE fails.
4. 3. 2. 1.
7