How To Route Cables - Pioneer PDP-S27-LR Operating Instructions Manual

English

2 How to route cables

Speed clamps and bead bands are included with the plasma
display for tidying your cables and keeping extra cable
length out of the way.
NOTE:
Cables can be routed to the right or left.
To the right
Speaker cable
To the left
Speaker cable
1 Organize cables together using the
speed clamps provided with the
plasma display.
Insert 1 into an appropriate hole on the rear of the unit, then
snap 2 into the back of 1 to fix the clamp.
1
Speed clamps are designed to be difficult to undo once in
place. Please attach carefully.
To remove speed clamps
Using pliers, twist the clamp 90° and pull it outward.
In some cases the clamp may have deteriorated over time
and may be damaged when removed.
4
Speed clamps System cable
Speed clamps System cable
2
*As viewed from the rear of the display.
To attach the speed clamps to the main unit
Connect the speed clamps using the 4 holes marked with •
below, depending on the situation.
Speed clamps Speaker cable
Speed clamps Speaker cable