Removing the 3G Module
1. See "Removing the Lower Cover" on page 47.
2. Disconnect the two (2) antenna cables from the 3G board and remove the two (2) screws to release the 3G
board.
NOTE: Cable placement
HDD.
Step
3G Board
Disassembly
3. Detach and remove the 3G board from the 3G socket.
Chapter 3
is as follows: Main (yellow) is closest to WLAN card, Aux (blue) is closest to
Size
M2.0*4.0
Quantity
2
Screw Type
51