Download  Print this page

Advertisement

Setting a Password
Follow these steps as you set the user or the supervisor password:
Use the ↑ and ↓ keys to highlight the Set Supervisor Password parameter and press the Enter key. The
1.
Set Supervisor Password box appears:
2.
Type a password in the "Enter New Password" field. The password length can not exceeds 8
alphanumeric characters (A-Z, a-z, 0-9, not case sensitive). Retype the password in the "Confirm New
Password" field.
IMPORTANT:Be very careful when typing your password because the characters do not appear on the screen.
3.
Press Enter. After setting the password, the computer sets the User Password parameter to "Set".
4.
If desired, you can opt to enable the Password on boot parameter.
5.
When you are done, press F10 to save the changes and exit the BIOS Setup Utility.
Removing a Password
Follow these steps:
Use the ↑ and ↓ keys to highlight the Set Supervisor Password parameter and press the Enter key. The
1.
Set Password box appears:
2.
Type the current password in the Enter Current Password field and press Enter.
3.
Press Enter twice without typing anything in the Enter New Password and Confirm New Password fields.
The computer then sets the Supervisor Password parameter to "Clear".
Chapter 2
S e t S u p e r v i s o r P a s s w o r d
E n t e r N e w P a s s w o r d
C o n f i r m N e w P a s s w o r d
S e t S u p e r v i s o r P a s s w o r d
E n t e r C u r r e n t P a s s w o r d
E n t e r N e w P a s s w o r d
C o n f i r m N e w P a s s w o r d
[
[
]
]
[
]
[
[
]
]
[
]
[
[
]
]
25

Advertisement

Table of Contents

   Also See for Acer TravelMate 8472

   Related Manuals for Acer TravelMate 8472

This manual is also suitable for:

Travelmate 8472tTravelmate 8472tgTravelmate 8472g

Comments to this Manuals

Symbols: 0
Latest comments: