Switching Operation Mode Between Mouse And Projector - NEC LT150 User Manual

Switching operation mode between mouse and projector

The three shaded buttons shown on the drawing work as a computer mouse in the Computer mode.
In the Computer mode the PJ button is not lit.
* When the MENU button is pressed, the PJ button lights red to indicate that you are in the Projector mode, which allows the projector menu
operation using the three buttons.
* When the POINTER button is pressed, the PJ button lights red to indicate that you are in the Projector mode and that the MOUSE
button works as a moving button for the POINTER or magnified image.
* If no buttons are pressed within 10 seconds, the PJ button's light goes out to indicate that you are in the Computer mode. To enable the
projector menu operation again, press the PJ button to light red. To move the pointer or a magnified image again, turn off the pointer and then
turn on the pointer (press the POINTER button two times).
* When the PJ button is lit, if you want to use the mouse function immediately, press the PJ button to return to the Computer mode (not lit).
OFF ON
S - VIDEO AUTO ADJ.
VIDEO
RGB 1 RGB 2 PJ
MENU LASER
R-CLICK /CANCEL
HELP POINTER PC CARD
KEYSTONE MAGNIFY SLIDE
FREEZE VOL. FOLDER
PIC - MUTE
SLIDE
LIST
Not lit
Works as a mouse for your computer.
Works as a right-click button for your computer.
Works as a left-click button for your computer.
L-CLICK/ENTER
OFF ON
S - VIDEO AUTO ADJ.
VIDEO
RGB 1 RGB 2 PJ
MENU LASER
R-CLICK /CANCEL
HELP POINTER PC CARD
KEYSTONE MAGNIFY SLIDE
FREEZE VOL. FOLDER
PIC - MUTE
SLIDE
LIST
E–18
Lit red
Works as the Select button on the projector.
Works as the Cancel button on the projector.
Works as the Enter button on the projector.
L-CLICK/ENTER