HP t730 Troubleshooting Manual page 54

12. Select File > Apply Defaults and Exit.
13. Shut down the computer, remove AC power cord, and then place the (blue/green) jumper back on header
E49. Replace the computer hood and power cord.
Model
t730
The information contained herein is subject to change without notice.
The only warranties for HP products and services are set forth in the express warranty statements
accompanying such products and services. Nothing herein should be construed as constituting an additional
warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
If you require additional information or need assistance please contact James Smalls at 281-514-5723.
48 Appendix H Statement of Volatility
Description Location/Size
System Boot ROM SPI ROM (64 Mbit)
(BIOS) socketed,
removable.
System memory SODIMM socket.
(RAM) Removable (4GB/
8GB)
RTC (CMOS) RAM RTC RAM is 272–
byte RAM Memory
embedded in AMD
APU's Fusion
Controller Hub
(FCH).
Keyboard/mouse 2k bytes embedded
(ROM) in the super I/O
controller (SIO12)
Keyboard/mouse 256 bytes
(RAM) embedded in the
super I/O controller
(SIO12)
LOM EEPROM 256 bytes
embedded in LAN
Chip
TPM 6 kBytes embedded
in TPM Chip. It's
ROM for TCG
Firmware
Power Loss of data
Main power If main power is
removed
Main/battery If battery power is
removed
Main
Main If main power is
removed
Aux
Main
Comments
Only S0/S3/S5/G3
ACPI states are
supported
One Time
programmable
memory (OTP)