Establishing Communication; Connecting By Telephone Line; Connecting By Ethernet; Connecting By Gprs - VeriFone VX 520-G Installation Manual

Establishing
Communication
Connecting by
Telephone Line.
WARNING
Connecting by
Ethernet
Connecting by
GPRS
You can connect the VX 520-G using three options: By telephone line, by ethernet
and via GPRS.
Connect the telephone cord to the communication port on the terminal, then route
it directly to a telephone wall jack (see
the line is dedicated to the terminal.
RJ-11
Figure 6 VX 520-G Direct Telephone Connection
To reduce the risk of fire, use only No. 26AWG or larger UL Listed or CSA
Certified Telecommunication Line Cord.
Connect the ethernet cable to the ETH port on the terminal, then route it directly to
a network wall jack (see
Figure 7 VX 520-G Ethernet Connection
Insert the SIM card according to the instructions on
Card to get your VX 520-G connected to the GPRS network provider.
Figure 6). This is a direct connection and
Figure 7). This is a direct connection to your network.
RJ-45
T
ERMINAL

Establishing Communication

Installing or Replacing SIM
VX 520-G I
NSTALLATION
S
ETUP
19
G
UIDE