Mounting; Installing Direction - Panasonic SF-C21 Instruction Manual

2-5 Mounting

● Do not touch the terminals while power is turned ON. Doing so may cause an electric shock.
● Be careful to prevent entry of foreign materials, such as chip and wire scrap into this device.
Otherwise, this could cause fire, failure or malfunction.
● Do not disassemble or modify this device. Doing so could cause failure, malfunction, injury, or
fire. When this device is repaired or modified by other than us, this device will not be covered by
our guarantee.
● Do not touch the conductive parts of this device directly. Doing so could cause malfunction or
failure of this device.
● Do not drop or apply strong impact on the case of this device, which is made of resin.
Doing so could cause damage to it.
● Fix this device with the DIN rail or screws securely.
● Install this device on a flat surface.
Installing it on an uneven surface applies excessive force to internal parts, resulting in a failure.
● In case of disposal, dispose this device as an industrial waste.

2-5-1 Installing Direction

When installing this device, make sure that it is correctly oriented. The device must be installed
vertically with its indicators and terminal blocks facing the operator side in order to ensure heat
dissipation.
© Panasonic Industrial Devices SUNX Co., Ltd. 2016
Installed in vertically
reversed orientation
WARNING
CAUTION
Horizontally installed
Mounting
Sideways installed
15