Operating Instructions - Worx WU282 User Manual

Operating instructions

Note: Before using the tool, read the instruction book
carefully.
Intended use:
This tool is intended for the fastening and loosening of bolts, nuts and
various threaded fasteners. This tool is not intended for use as a drill.
1
COLLET LOCKING SLEEVE
Pull the collet locking sleeve forward. Fully insert the desired bit into
the chuck and release the collet locking sleeve. The collet accepts
only standard 1/4" hexagonal shank accessories with power groove.
Do not use this tool as a drill. Tools equipped with shutoff clutches
are not designed for drilling applications. The clutch can shut off
automatically and without warning. Attempting to restart drilling after
shut-off has been reached can cause the tool to twist out of your
hand until the clutch again reaches shut-off. Do not attempt to insert
quick change type drill bits into this chuck.
2
REMOVING A BIT HOLDER, SOCKET OR SCREWDRIVER BIT
Pull the collet locking sleeve forward. Take the tool out of the chuck
and release the collet locking sleeve (Fig. A).
3
FORWARD, REVERSE ROTATION AND LOCK CONTROL
Your tool is equipped with a forward, reverse rotation and lock
control located above the on/off switch. It was designed for changing
rotation of the chuck and for locking the on/off switch in the center
position to help prevent accidental start and accidental battery
discharge.
For forward rotation, (with chuck pointed away from you) move the
lever to the far left. For reverse rotation move the lever to the far right.
To activate switch lock move the lever to the center off position.
Caution: Do not change direction of rotation until the tool
comes to a complete stop. Shifting during rotation of the chuck can
cause damage to the tool.
4
RELEASING AND INSERTING BATTERY PACK
Release battery pack from tool by pressing on both sides of the
battery pack latch and pull downwards. To insert battery, align battery
and slide battery pack into tool until it locks into position. Do not
force.
5
USING THE SIGHT LIGHT
The sight light allows you to keep a clear view under less illuminated
circumstances. To turn on the light simply press the on/off switch.
When you release the on/off switch, the light will be off. (Fig.B)
7