BATTERY PACK RELEASE BUTTON BATTERY PACK ON/OFF SWITCH WITH VARIABLE SPEED CONTROL LED LIGHT COLLECT LOCKING SLEEVE BIT CLIP 10. BATTERY CAPACITY INDICATOR TECHNICAL DATA WX292 WX292.9 WX292.1 Charger voltage 100-240V ~ 50/60Hz Rated voltage Max* Nominal voltage No load speed...
When operating a power tool outdoors, correct power tool for your application. use an extension cord suitable for outdoor The correct power tool will do the job better and use. Use of a cord suitable for outdoor use WX292 WX292.1 Lithium-Ion Brushless Impact Driver WX292.9...
Replace battery with (WORX connection from one terminal to another. 20V) only. Use of another battery may...
Page 9
18) Use only the cell or battery in the application for High speed which it was intended. SYMBOL Low speed To reduce the risk of injury, user must read instruction manual RCM marking Warning C-tick marking WX292 WX292.1 Lithium-Ion Brushless Impact Driver WX292.9...
See Fig. D1, D2, D3 is rotating, wait until it is stopped! OPERATION Operating the On/Off Switch WARNING: Do not operate for long periods at low speed See Fig. E because excess heat will be produced internally. WX292 WX292.1 Lithium-Ion Brushless Impact Driver WX292.9...
Battery Pack energy faster than lighter working conditions. Do not re-charge your Battery Pack below C and above 30 C as this will affect performance. WX292 WX292.1 Lithium-Ion Brushless Impact Driver WX292.9...
Need help?
Do you have a question about the WX292 and is the answer not in the manual?
Questions and answers