■
Programming other devices
To program other devices such as home security systems, home
door locks or lighting, contact your Toyota dealer for assistance.
■
Reprogramming a button
The individual HomeLink
reprogrammed. To reprogram a button, follow the "Reprogramming
a HomeLink
Operating HomeLink
Press the appropriate HomeLink
light should come on.
The HomeLink
signal for up to 20 seconds as long as the button is pressed.
Reprogramming a HomeLink
Press and hold the desired HomeLink
HomeLink
indicator light will start flashing slowly. Next, while still
pressing and holding the HomeLink
ton on the transmitter until the HomeLink
from a slow to a rapid flash.
Erasing the entire HomeLink
Press and hold the 2 outside but-
tons for 10 seconds until the indi-
cator light flashes.
If you sell your vehicle, be sure to
erase the programs stored in the
HomeLink
memory.
LC200_OM_OM60M88U_(U)
5-4. Using the other interior features
buttons cannot be erased but can be
button" instructions.
button. The HomeLink
compatible transceiver in your vehicle continues to send a
button
memory (all three programs)
I n f o r ma t i o n P r o v i d e d b y :
button. After 20 seconds, the
button, press and hold the but-
indicator light changes
425
indicator
5