Toyota 2016 Landcruiser Manual page 345

Turning the BSM function/RCTA function on/off
1
Use the meter control switches to select
tion display.
2
Choose "BSM" using
3
Choose "BSM" or "RCTA" using
■
The outside rear view mirror indicators visibility
When under strong sunlight, the outside rear view mirror indicator may be dif-
ficult to see.
■
RCTA buzzer hearing
RCTA buzzer may be difficult to hear over loud noises such as high audio vol-
ume.
■
When "Blind Spot Monitor Unavailable" is shown on the multi-informa-
tion display
Water, snow, mud, etc., may be built up in the vicinity of the sensor area of
bumper. (P. 346)
Removing the water, snow, mud, etc., from the vicinity of the sensor area
bumper should return it to normal.
Also, the sensor may not function normally when used in extremely hot or cold
weather.
■
When "Blind Spot Monitor System Malfunction" is shown on the multi-
information display
There may be a sensor malfunction or voltage abnormality. Have the vehicle
inspected at your Toyota dealer.
■
Certification for the Blind Spot Monitor
LC200_OM_OM60M88U_(U)
4-5. Using the driving support systems
on the multi-informa-
, and then press
, and then press
I n f o r ma t i o n P r o v i d e d b y :
345
.
.
4