Table of Contents
Advertisement
238
4-5. Using the driving support systems
■
Operational conditions
For vehicles sold in regions where the pedestrian detection function and
pre-collision braking function are available
The pre-collision system is enabled and the system determines that the pos-
sibility of a frontal collision with a vehicle or pedestrian is high.
Each function is operational at the following speeds:
●
Pre-collision warning:
• Vehicle speed is approximately 7 mph (10 km/h) or more. (For detecting a
pedestrian, vehicle speed is between approximately 7 and 50 mph (10
and 80 km/h).)
• The relative speed between your vehicle and the vehicle or pedestrian
ahead is approximately 7 mph (10 km/h) or more.
●
Pre-collision brake assist:
• Vehicle speed is approximately 19 mph (30 km/h) or more. (For detecting
a pedestrian, vehicle speed is between approximately 19 and 50 mph (30
and 80 km/h).)
• The relative speed between your vehicle and the vehicle or pedestrian
ahead is approximately 19 mph (30 km/h) or more.
●
Pre-collision braking:
• Vehicle speed is approximately 7 mph (10 km/h) or more. (For detecting a
pedestrian, vehicle speed is between approximately 7 and 50 mph (10
and 80 km/h).)
• The relative speed between your vehicle and the vehicle or pedestrian
ahead is approximately 7 mph (10 km/h) or more.
The system may not operate in the following situations:
●
If a battery terminal has been disconnected and reconnected and then the
vehicle has not been driven for a certain amount of time
●
If the shift lever is in R
●
If VSC is disabled (only the pre-collision warning function will be opera-
tional)
●
If the PCS warning light is flashing or illuminated
LC200_OM_OM60M88U_(U)
*
4
I n f o r ma t i o n P r o v i d e d b y :
Hide quick links:
Advertisement
Table of Contents
