Table of Contents
Advertisement
194
4-2. Driving procedures
Stopping the engine
1
Stop the vehicle.
2
Shift the shift lever to P.
3
Set the parking brake. (P. 204)
4
Press the engine switch.
5
Release the brake pedal and check that the display on the instru-
ment cluster is off.
Changing engine switch modes
Modes can be changed by pressing the engine switch with brake
pedal released. (The mode changes each time the switch is pressed.)
*
1
Off
The emergency flashers can be
used.
2
ACCESSORY mode
Some electrical components such
as the audio system can be used.
"ACCESSORY" will be displayed
on the multi-information display.
3
IGNITION ON mode
All electrical components can be
used.
"IGNITION ON" will be displayed
on the multi-information display.
*
: If the shift lever is in a position
other than P when turning off the
engine, the engine switch will be
turned to ACCESSORY mode, not
to OFF.
LC200_OM_OM60M88U_(U)
I n f o r ma t i o n P r o v i d e d b y :
Hide quick links:
Advertisement
Table of Contents
