Important Safety Instructions; Save All Warnings And Instructions For Future Reference - Makita BUK360 Instruction Manual

And are manufactured in accordance with the following
standards or standardised documents:
EN60745, EN709
The technical documentation is kept by our authorised
representative in Europe who is:
Makita International Europe Ltd.
Michigan Drive, Tongwell,
Milton Keynes, Bucks MK15 8JD, England
The conformity assessment procedure required by
Directive 2000/14/EC was in Accordance with annex VI.
Notified Body:
TÜV Rheinland LGA Products GmbH
Am Grauen Stein 29
51105 Köln Germany
Identification number 0197
Measured Sound Power Level: 79 dB (A)
Guaranteed Sound Power Level: 81 dB (A)
000230
Tomoyasu Kato
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, 446-8502, JAPAN
IMPORTANT SAFETY
INSTRUCTIONS
WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
Intended use
This equipment is intended for soil cultivation
only. Use the equipment for this purpose only.
Using for any other purposes may cause
serious injury and/or damage to the
equipment.
Training/ Information
1. Do not insert key into the equipment until it is
ready to be used.
2. Be familiar with the controls and proper use of
the equipment.
3. Never allow children or people unfamiliar with
the instructions to use the machine. Local
29.12.2011
Director
regulations can restrict the age of the
operator.
4. Never work while people, especially children,
or pets are nearby.
5. Do not operate the equipment while under the
influence of drugs, alcohol, or any medication.
6. Keep in mind that the operator or user is
responsible
occurring to other people or their property.
Preparation
1. While working, always wear substantial footwear
and long trousers. Do not operate the equipment
when barefoot or wearing open sandals.
2. Thoroughly inspect the area where the equipment
is to be used and remove all objects which can be
thrown up by the machine.
3. Before using, always visually inspect to see
that the tools are not worn out or damaged.
Replace worn out or damaged elements and
bolts in sets to preserve balance.
Operation
1. Work only in daylight or in good artificial light.
2. When working on slopes:
−
GEB095-6
−
−
−
3. Do not work on excessively steep slopes.
4. Walk, never run with the machine.
5. Use extreme caution when reversing or pulling
the machine towards you.
6. Start
manufacturer instructions and with feet well
away from the tool(s).
7. Do not put your hands or feet near or under
rotating parts.
8. Never pick up or carry a machine while the
motor is running.
9. Switch off the equipment and remove the lock
key in the cases below:
−
−
10. Pay particular attention on hard or stony field
because the machine tends to be much less
stable than on cultivated ground and use slow
speed for ploughing.
3
for accidents
Make sure that there are no children or
other people within a working range of 20
meters (66 ft), also pay attention to any
animals in the working vicinity. Otherwise
stop using the tool.
always be sure of your footing,
work across the slopes, never up and
down,
exercise extreme caution when changing
direction on slopes.
the motor carefully
whenever you leave
unattended,
before clearing blockages.
or hazards
according to
the machine