NEC MOBILEPRO 900 User Manual page 30

Align and attach the PC Connect cable to the serial port on the
2.
MobilePro. (If your cable is labeled, insert the cable with the word
Up visible on the top. If your cable has an arrow near the
connector, insert the cable with the arrow visible on top.)
Connect the other end of the cable to the 9-pin serial port on your
3.
host PC. If your host PC has a 25-pin serial port, use an adapter
(available in most computer stores).
Note
your host PC, be sure that the serial port is enabled in the host PC's
BIOS setup and that no conflicts exist for the port. For details, see a
previous section in this chapter, "Ensuring the Availability of the Serial
Port."
in the ports. Incorrect connection can damage the MobilePro and the
computer.
Continue to the next section to install Microsoft ActiveSync.
1-22 Getting Started
Locating the serial port
A – MobilePro Serial Port
Before connecting the PC Connect cable to the serial port on
Be sure to properly align the cable connectors