Installing Activesync - NEC MOBILEPRO 900 User Manual

Installing ActiveSync

Follow these steps to install Microsoft ActiveSync for synchronization
with Microsoft Outlook. The installation sequence might vary
depending upon the Microsoft components installed on your host PC.
Note
must install Windows NT Networking before installing Microsoft
ActiveSync on your host PC.
Insert the Microsoft ActiveSync 3.1 CD in the CD-ROM drive of
1.
your host PC.
Note
Host PC systems with the Microsoft Windows XP operating system
require ActiveSync 3.5.
You can download ActiveSync 3.5 from the NEC Solutions America
support site (
Upgrade to Microsoft ActiveSync 3.5
(
www.microsoft.com/mobile/pocketpc/downloads/activesync35.asp
!
!
Click Next to start the setup wizard. The Selection Installation
2.
folder appears.
Click Next to accept the default installation folder or modify the
3.
folder destination and click Next.
The Get Connected window appears.
Read the instructions about connecting your device and click
4.
Next.
The host PC verifies the availability of a COM port and polls the
MobilePro for synchronization settings. The New Partnership
window appears.
1-24 Getting Started
If your host PC uses the Windows NT
The Microsoft ActiveSync software contains ActiveSync 3.1.
www.necsolutions-am.com/support,
If auto-insert is enabled on your host PC, the setup window
appears.
If auto-insert is not enabled, go to Start, Run, browse for the
CD-ROM drive, and run the setup.exe file.
®
operating system, you
select
) or from the Microsoft Web site
and
Handhelds
).