203 Eng Fr Cndn manual
Step 3 Locate Adapter
Plate "A" that
is supplied with
the IntelliBase
and secure it to
the spindle using
the screw that
was removed
in Step 2
as shown in
Figure 2B.
Step 4 Locate the two
screws that are
supplied with
the IntelliBase
and attach the
IntelliBase to
the adapter plate
and monitor
as shown
in Figure 2C.
Proceed to Page 10 to connect your MultiSync
USB Hub and Audio to your system.
12/21/98 11:20 AM
Page 8
Figure 2B
ADAPTER
PLATE (A)
™
SPINDLE
ROTATE ADAPTER
PLATE UNTIL IT
ALIGNS WITH
THROUGH HOLES
ON THE BASE
®
4
GUIDE SPINDLE
THROUGH CENTER
HOLE ON ADAPTER
PLATE (A)
Figure 2C
INTELLIBASE
(BOTTOM VIEW)
monitor with the IntelliBase