203 Eng Fr Cndn manual
Step 8 Locate the two
screws that are
supplied with
the IntelliBase
and attach the
IntelliBase to
the adapter plate
and monitor
as shown in
Figure 4G.
Proceed below to connect your MultiSync
Hub and Audio to your system.
How to connect your MultiSync monitor with
IntelliBase USB Hub and Audio to your system
Step 1 Having successfully
installed your new
IntelliBase, carefully
turn the monitor
right side up
as shown in
Figure 5.
12/21/98 11:20 AM
Page 14
™
ROTATE ADAPTER
PLATE UNTIL IT
ALIGNS WITH
THROUGH HOLES
ON THE BASE
®
monitor with the IntelliBase USB
10
Figure 4G
INTELLIBASE
(BOTTOM VIEW)
Figure 5