Connection Of Nfc - VIETA VC-HU720BT User Manual

Usb/sd radio
Table of Contents

Advertisement

Available languages

Available languages

RBDS OPERATION
- Using PTY/AF to Select Program
Press PTY/AF button once to select the PTY
n
group. Then rotate the volume knob to select the
PTY program.
After selecting the PTY program the unit searches for
the respective stations and stops when a station is
found.
With PTY ON, press PTY/AF button again to cancel
n
the PTY function.
- Listening to Traffic Announcement
Press and hold EQ/TA button , the unit will search
Traffic Announcement automatically. Press and hold
EQ/TA button. TA mode will exit.
Note: When selecting AREA EUR in system setting,
hold press PTY/AF button to switch on or off RDS
function. Whenever RDS is switch on, symbol "AF"
appears on the display.
MAKING AN OUTGOING CALL
Making an outgoing call by inputting the phone
number manually.
Press
button again will call the number.
Note: if you input the wrong number, shortly press
CLR button will clear it. Press and hold CLR button
will clear all number.
TRANSFER THE CALL BETWEEN MOBILE
PHONE AND THE UNIT
During the talking mode, you can press
button to transfer the phone call between the mobile
phone and the unit.
Note:
If you transfer the call to mobile phone, the mute of
the present mode will be released at the same time.
26

Connection of NFC

1. Check if the NFC function of your smartphone is
displayed ON.
2. Please set the NFC function of your smartphone to
ON.
USB/SD Radio
3. When your NFC phone has been turned on, put
your phone near the volume knob of the CD player.
4. Maintaining smartphone near CD player volume
knob until the smartphone is connected, and the top
of the smartphone screen will appear CONN OK. At
this moment, the smartphone will emit a short beep
to confirm.)When the phone prompts for a PIN code,
enter the PIN code : 0000)
5. If you want to disconnect, also keep your
smartphone close to CD player volume knob until the
smartphone is disconnected, and the top of the
smartphone screen will appear DISCONN. The
smartphone will emit a short beep to confirm.
Note : NFC sensor chip is located in the volume
knob, so when you use the NFC feature, keep your
smartphone away from the volume knob preferably
not more than 5mm.
27
ENGLISH

Advertisement

Table of Contents
loading

Table of Contents