Selecting The Frequency Band; Selecting Station; Automatic Memory Storing&Program Scanning; Station Storing - VIETA VC-HU720BT User Manual

Radio Operation

SELECTING THE FREQUENCY BAND

At radio mode, press BND button shortly to select the
desired band.
The reception band will change in the following
order:
FM1, FM2, FM3, MW AM）

SELECTING STATION

Shortly press / buttons to activate
automatic seek function. Press for several seconds
until "MANUAL" appears on the display, the manual
tuning mode is selected. If both buttons have not
been pressed for several seconds, they will return to
seek tuning mode and "AUTO" appears on the
display then disappears.
AUTOMATIC MEMORY STORING &
PROGRAM SCANNING
- Automatic memory storing
Press AMS button for several seconds "SEARCH"
will appear on LCD.
the radio will search from the current frequency
and checks the signal strength until one cycle search
is finished. And then 6 strongest stations are stored
into the corresponding preset number button.
- Program scanning
Press AMS button shortly to scan preset station. And
the corresponding station number P1~P6 will flash
on LCD.
NOTE:
In MP3 playback mode,press the AMS key selections.
MONO/STEREO
Press MON button to select mono or stereo mode.
You can sometimes improve reception of distant
stations by selection mono operation.

STATION STORING

Press any one of the preset buttons (1 to 6) to select
a station, which had been stored in the memory.
Press this button for several seconds to store the
current station into the number button.
24
USB Play Operation
In the front panel of the unit, there is an USB
interface. You can connect an USB device through
this interface.
When you connect an USB device through the
interface, the unit will search the MP3 files or WMA
files in the USB driver and start to play MP3 files or
WMA files automatically.
If in other mode, you can also press MODE button to
select USB mode.

SELECTING DIRECTORY UP/DOWN

Press DIR- button or DIR+ button to select directory
downward or upward. If the MP3/WMA file does not
contain any directory, there is no function of pressing
DIR- button or DIR+ button.
PAUSING PLAYING
Press PAU button to pause the play. Press it again to
resume play.
PREVIEWING TRACKS
Press INT button to play first several seconds of each
track. Press again to stop intro and listen to track.

REPEATING THE SAME TRACK

Press RPT button to continuously repeat the same
track. Press it again to stop repeat.
PLAYING TRACKS IN RANDOM
Press RDM button to play all tracks on the USB in
random order. Press again to cancel the function.
SELECTING TRACKS BY AMS BUTTON
Press AMS button, then You can use the volume
buttons to select the track directly.
Then press the VOLUME button or BND button to
start playing the track.

DISPLAY INFORMATION

Press DISP button to show the following information,
such as the clock, ID3 TAG (if available: song title,
directory name, artist name, other contents...) (FOR
USB/SD Radio
WITH MP3 ID3 FUNCTION VERSION ONLY) and
other information.
Note:
The main unit can only support the standard USB-
n
memory device which is approved by Microsoft.
USB MP3 player is not a standard which means
n
different brand name or different models have their
own standard. So our product cannot support every
MP3 player.
When connecting an MP3 player and there has
n
normal battery in the player (non rechargeable
battery), you should remove the battery from the
MP3 player then connect it to the USB interface.
Otherwise, it may cause battery burst.
When in USB play mode, be sure not to remove the
n
USB driver from the USB interface.

Memory card operation

There is a memory card interface on the housing the
unit.
When you insert a memory card in the memory card
interface, the unit will search the MP3 files or WMA
files in the card and start to play MP3 files or WMA
files automatically.
The operation is the same with the USB operation
described above.
CAUTION
When there are important files in the USB device or
the memory card, do not connect it to the main unit to
play. Because any wrong operation may cause files
loss. And our company assumes no responsibility for
this.

Bluetooth Operation

PREPARING FOR OPERATION
1. When use Bluetooth, please make sure the mobile
phone supports Bluetooth function.
2. For the different kind of mobile phone, Bluetooth
emissive power has some difference. To get the
best conversation quality, it is commended that the
distance between the mobile phone and the unit is
within 3m. And please don't put any metal object or
any obstacle between the path of the mobile phone
and the unit.
PAIRING
1. Long pressing MODE button until LCD display
PAIRING to enter paring mode. On the mobile phone,
select the Bluetooth set up. (Please refer to the
instruction manual of your mobile phone on how to
operate Bluetooth.)
2. "Vieta" should appear in the list on your mobile
phone, please select "Vieta" and then input password
"0000".
3. The unit has auto pairing function, it will searching
the Bluetooth mobile phone automatically.
4. When successful paired, the Bluetooth sign will be
displayed on LCD.
5. If pairing failed, try to pair again within several
seconds. You can refer to the operation about your
mobile phone, delete the device that just searching
for and repair again.
RE-CONNECTING
This unit is built-in auto-reconnection function. In
some conditions, the unit will auto reconnect with
the mobile phone (note: the mobile phone must have
been paired with the unit before.)
Before dialing you need to confirm the Bluetooth
sign is displayed on LCD. Within ten seconds
in the following conditions:
a. when you turn off the unit and then turn it on again.
b. switch off the ACC wire and switch it on again.
c. press (release) button to release the front panel
and install the panel again.
Press button, 'NOT PAIR' may be displayed on
the LCD. You can wait for several seconds to let the
unit reconnection automatically During
reconnection, LCD will show "CONN TRY" several
times and then show "CONN OK" if successfully
connect.
25
ENGLISH