Description Of State Indicator; Charging; Phone Connection; Product Specifications - Livall BH60 User Manual

II. Description of state indicator

Charging:

Flashes every four seconds and stops ashing when charging is complete.
Under connection:
In standby state, press any button to connect. The state indicator flashes rapidly.
After a success connection, the indicator will be steady on; if the connection fails, the
indicator will enter the connection waiting state.
Connection waiting:
In standby state, press any button. If there's no Livall APP for connection within 3
seconds, the indicator will ash every 2 seconds, indicating the connection waiting
state; if there's still no connection for 30 seconds, it will return to the standby state.
Connection completed:
The indicator remains steady on when the connection is completed, until it enters the
standby state.
III. CHARGING
Remove the USB water-proof block, and use a Micro USB cable to connect the product
to a charger with safety approvals such as CCC or UL. While charging, the indicator
ashes every four seconds and stops ashing when charging is complete.
IV. PHONE CONNECTION
Refer to the instructions to adding device of mobile phone APP.
V. PRECAUTIONS
This product could only be used with Livall APP and does not currently support third
party Apps.
Properly store this product and relevant accessories and place them out of reach of
children.
Keep the product away from re or other heat sources to avoid danger.
Changes or unauthorized repair of the product could cause the product failing in
normal use and void the warranty.
For more information, please visit www.livall.com.
Product speci cations
VI. PRODUCT SPECIFICATIONS
Wireless distance:
Buttons:
Charging port:
Electric parameter:
Battery capacity:
Charging duration:
Battery life:
Standby duration:
Size:
Application:
Operating Temperature:
Max. 10m
four direction buttons, con rm, intercom, photos
Micro USB
DC 5V/0.3A
3.7V/120mAH
2h
100h
180d
57.8*37*55.4mm
All bicycles
-10 ℃ ~40 ℃ (14 ℉ ~104 ℉ )
9 9