Advertisement
Quick Links
Advertisement
Related Manuals for Livall BH51 Series
Summary of Contents for Livall BH51 Series
- Page 1 Bling helmets Quick Start Guide www.livall.com...
-
Page 2: Packing List
I. Introduction Welcome to the User Guide for LIVALL smart cycling helmets. This Guide will help you better use this product. With continuous improvements of our products, this Guide will be updated from time to time. You can access the latest version and learn more about the helmet on www.livall.com. -
Page 3: Wearing Instructions
III.Wearing Instructions Incorrect Incorrect Proper Wearing Adjust the length Leave a gap as Correctly position Check whether the buckle is of the chinstrap the helmet properly fastened... - Page 4 IV.Operating Instructions (charge the product before use) “ ”button Power on: Hold press the button at the back of the product until the indicator light turns on. Warning lighting Adaptive warning lighting: The LED taillight will blink for 10 seconds after the helmet is powered on, then enter adaptive warning light environment, and turns on automatically at night or in a dark environment.
- Page 5 Charging: 1.When the soft rubber lid with “LIVALL” image 2.To charge: is opened, the Magnetic charging port will be Insert a USB cable into the USB Charging cable seen. interface of the helmet. Charging starts when the button indicator blinks.
- Page 6 Connecting to the BR series remote control After successful connection, Blink three times press the " " or " " button Within 5 m of the remote to control the turn signal light of the helmet. Turn on the Bling remote After successful connection, the controller, which will connect to indicator will blink three times...
- Page 7 2. Connecting to a new remote control(in case the original remote control gets lost or damaged): Blink three times Press the " " button on the helmet within connection to the the Bling remote controller Keep the active Bling remote The LED taillight will blink once After successful connection, the controller near the control...
- Page 8 Note: If the helmet does not wake up, make sure the battery levels are adequate. 3. Anti-Loss Alarm Prompted when a user’s helmet is connected to the LIVALL riding app and the distance between the helmet and smartphone exceeds 15m, both the helmet and smartphone will trigger an alarm to alert the user.
- Page 9 BH51M BH51T BH51M Functions BH51M BH51T Smart Warning Lightings ● ● ● ● ● LED Turn Signals ● ● ● ● ● Make a Call Via Bluetooth ● ● ● Listen to Music Via Bluetooth ● ● ● PTT Walkie-Talkie ●...
- Page 10 For IOS: Follow LIVALL Riding guide to connect to the LIVALL Riding App LIVALL ON FACEBOOK helmet. Only if the helmet is successfully connected to LIVALL App, SOS alert feature and LED light indicators can work.
- Page 11 4. If the electronic functions do not work, please charge the helmet for 3 hours and then check if it works normally. 5. The helmet contains impact detection devices. Only if you connect your helmet with LIVALL App, start ride mode on the LIVALL App can accordingly receive your SOS messages.
- Page 12 During the usage, if the following troubles occur, please charge the product according to quick guide of the model(the helmet can be reset during the charging). If the problems still can not be solved, please contact the after-sales service center. (After-sales email: riding@livall.com) Faults: 2.
- Page 13 Designed and Assembled in Shenzhen China LIVALL HELP CENTER...
Need help?
Do you have a question about the BH51 Series and is the answer not in the manual?
Questions and answers