Operating Instruction; Cleaning; Start Up; Connect To A Bluetooth Earphone - Livall BH60 User Manual

Cleaning

To avoid damage to the electronic components inside the helmet, please use clean
and soft cloth for cleaning. Do not soak the helmet in water. Do not use hot water, salt
water, benzene, diluents or other lotions. Detergent such as vinyl can be used to clean
the plastic casing. The drawstrings and lining are removable and washable. Wash
the drawstrings and lining in normal temperature water and dry them out before
installing them back into the helmet.
IV. OPERATING INSTRUCTION
Visit www.livall.com to download and install the Livall App. Follow the wizard for
connection. It will take a while to connect the helmet to a smart phone for the rst
time. After a successful connection, the helmet will be connected automatically
afterwards. For details, please refer to the following instructions.

Start up

Press and hold " " for 2 seconds until you hear the "power on, ready to pair" sound.
The tail light will ash orange and blink twice.
Shut down
When the device is in the working state, long press " " till you hear the "power o "
sounds, meanwhile the tail light will ash once in orange.

Connect to a Bluetooth earphone

Connection to a Bluetooth earphone is required when the helmet is used for the
rst time or when the smart phone connecting to it is changed. After the device is
turned o , press and hold " " until you hear the "ready to pair" sound, indicating
that the device starts matching: enable the Bluetooth function on the smart phone
to scan devices. Click the "BH60" device for connection. The speakers on both sides
will prompt "matching completed" after a successful connection. Next time when you
start up the device, the Bluetooth earphone will be connected automatically.
Answer and hang up a call
The device will alert you when there is an incoming call. To answer a call, press " " ; to
reject a call, press and hold " " for one second; to hang up a call during talking, press
" " .
Redial a call
When the device is started up, quickly press " " twice to redial the last outgoing call.
Play music
When the device is started up, press " " to play music (a music player App in the
mobile phone must be enabled beforehand). Press and hold "-" to play the previous
song; press and hold "+" to play the next song.
Adjust volume
During music playing or a call, press "+" for volume up or press "-" for volume down.
Switch the noti cation voice of Bluetooth speaker
The default setting is English. When the device is started up, press and hold "-", and
4 4