Proper Wearing; Comfort Adjustment; Checking - Livall BH60 User Manual

drawstrings respectively to a most appropriate position.
Front Back
Adjustment buckle
Rear drawstring
Front drawstring
Buckle

Proper Wearing

CORRECT
INCORRECT INCORRECT
The helmet must be worn closely to your head. If you want to lower the front of the
helmet to cover your forehead, you could make the front drawstring close to your chin
and loose the rear drawstring; if you want to raise the front of the helmet, you could
loosen the front drawstring and tighten the rear drawstring.

Comfort Adjustment

To check the tightness of the helmet, put on the helmet and buckle it up. Then,
open your mouth to feel whether the drawstrings are closely attached to your chin.
Next, move your helmet forward and backward, if the helmet gets loose, tighten the
drawstrings and check whether the thickness of the pad inside the helmet is proper.
The t cannot be too loose. In addition, do not try to take o the helmet before the
buckle is released. Note: Always check the t before wearing.

Checking

Make sure that the helmet ts securely on the head. Otherwise, readjust the tightness.
Check the t every time when you wear the helmet for best protection.
3 3