Sanyo DC-X801 Instruction Manual page 10

5
8
11
4
Unrecorded blank
Auto reverse
2
3
- When the disc playing time is shorter than the sped-
fled time on the side A, the CD player will be set to the
stop mode after the end of playing.
2. When the last track has played, the player will go to stop
mode.
"- -" EDIT, SIDE A, SIDE B
The cassette deck will continue recording mode to the
end of tape (side B).
- If the disc playing time is longer than the specified
time on the side B, the player will be set to the stop
mode after the automatic stop has activated on the
cassette deck.
The editing mode remains operational even upon comple-
tion of play. To release the edit mode, press the STOP
switch of the CD player.
Time edit recording (Fig. 13)
When the track 3 is not recordable within the specified time, select any
recordable track after track 4.
Unrecorded blank
SIDE A
1
2
6
Auto reverse
7
4
3
SIDE B
Unrecorded blank When the track 5 is not recordable within the specified time, select any
recordable track after track 6.
Fig. 13 •
Example:
The tape to be used is 46 min (23 min./one side)
1. Press the EDIT switch.
The CD display and CD operation indicator(s) show as:
"—" EDIT
2. To select the tape length to meet the recording tape,
press the EDIT switch within 3 seconds until "46" is
illuminated.
"46" EDIT
- Every time the switch is pressed, the tape length
display changes in the following sequence:
46 60 90 0 - - 46 . .
After this, the CD display and CD operation indicator(s)
show as:
"1"
EDIT, PROG., SIDE A
"2" EDIT, PROG., SIDE A
"6" EDIT, PROG., SIDE A
- Side A: Tracks 1,2, and 6 are recorded, making a total
play time of 22 min 33 sec (including the 5-second
unrecorded blanks between each recorded track.)
"3" EDIT, PROG., SIDE B
"4" EDIT, PROG., SIDE B
"7" EDIT, PROG., SIDE B
"8" EDIT, PROG., SIDE B
- Side B: Tracks 3, 4, 7 and 8 are recorded, making a
total play time of 18 min 22 sec.
"1" PLAY, EDIT, PROG., SIDE A
Recording of side A is started automatically. The CD
player will start play after 8 seconds waiting.
3. After the tracks to be recorded onto side A have played,
the player will go to pause mode at the beginning of the
first track to be recorded onto side B.
"3" PLAY (flashes), EDIT, PROG., SIDE B
The cassette deck will continue recording mode to the
end of tape (side A).
4. After the automatic reverse has activated on the cas-
sette deck, the player will play after 8 seconds waiting.
"3" PLAY, EDIT, PROG., SIDE B
5. When the last track has played the player will go to stop
mode.
The cassette deck will continue recording mode to the
end of tape (side B).
"46" EDIT, PROG., SIDE A, SIDE B
Programme edit recording (Fig. 14)
SIDE A
II
i: i : : !• : ig :
SIDE B
Unrecorded blank
Example:
The tape to be used is 46 min (23 min./one side) and the
order for recording is as follows:
Track 5 - 2 - 3 - 1 - 4 - 8
1. Press the EDIT switch.
The CD display and CD operation indicator(s) show as:
"- -" EDIT
Fig. 14
2. To select the tape length to meet the recording tape,
press the EDIT switch within 3 seconds until "46" is
illuminated.
"46" EDIT
3. Press the MEMO button on the remote controller within
3 seconds.
"1 (flashes)"
EDIT,
PROG., SIDE A
-9-