Adjusting Source Levels - Pioneer avh-x8750bt Owner's Manual

Chapter
21
Switching sound muting/
attenuation
Sound from this system is automatically
muted or attenuated when a signal from
equipment with a mute function is received.
1 Press the HOME button to display
the Top menu screen.
2 Touch the following keys in the
following order.
The "Audio" screen appears.
3 Touch [Mute Level].
The pop-up menu appears.
4 Touch the item you want to set.
ATT (default):
The volume becomes 1/10.
Mute:
The volume becomes 0.
Off:
The volume does not change.

Adjusting source levels

The SLA (source level adjustment) function
adjusts the volume level of each source to
prevent radical changes in volume when
switching between sources.
p This function is available only when main
audio is available.
p Settings are based on the FM tuner
volume level, which remains unchanged.
p This function is not available when the FM
tuner is selected as the AV source.
1 Compare the FM tuner volume
level with the level of the source
you want to adjust.
2 Press the HOME button to display
the Top menu screen.
50
En
3 Touch the following keys in the
following order.
The "Audio" screen appears.
4 Touch [Source Level Adjuster].
The "Source Level Adjuster" screen
appears.
5 Touch the following keys to adjust
the source volume.
Increases the source volume.
Decreases the source volume.
p If you directly touch the area where the
cursor can be moved, the SLA setting
will be changed to the value of the
touched point.
p "+4" to "–4" is displayed as the source
volume is increased or decreased.
p The default setting is "0".
The following AV sources are set to the same source level adjustment volume
automatically.
Required
cable (sold
separately)
CD-IU201V iPhone/iPod
iPod / iPhone
with a 30-pin
connector CD-IU201S iPhone/iPod
CD-IH202
iPod / iPhone CD-IU52
with a Lightning Lightning iPhone/iPod
connector Digital AV
Adapter
CD-MU200 or
USB-Micro USB Others
Cable
Android device
CD-AH200 Others
p When a USB storage device is connected
to USB port 1 or USB port 2, the source
level adjustment volume is automatically
set to the same level as the USB port
to which the device is connected. The
source level adjustment volume that is
automatically set varies depending on
whether the device is connected to USB
port 1 or USB port 2.
p When an iPod / iPhone with a Lightning
connector is connected to USB port 1
or USB port 2 using a USB interface
cable for iPod / iPhone (CD-IU52) (sold
separately), the source level adjustment
volume is automatically set to the same
level as the USB port to which the iPod
/ iPhone with a Lightning connector is
connected. The source level adjustment
volume that is automatically set varies
depending on whether the iPod / iPhone
with a Lightning connector is connected
to USB port 1 or USB port 2.
p When an Android Auto-compatible
device or a MirrorLink device is con-
nected to USB port 2, the source level
adjustment volume is automatically set to
the same level as USB port 2.
Smartphone Setup
AV sources
Device Connection
USB1
USB
iPod1
USB1
iPod1
USB
AppRadio
Mode
AppRadio
Digital AV
Mode
adapter
HDMI
Android Auto
USB
MirrorLink
AppRadio
HDMI Mode
HDMI
Adjusting the filter
The following adjustments can be made
during filter adjustments. Make the appro-
priate adjustments for the reproduced
frequency band and characteristics of the
connected speaker unit.
1
Level (dB)
0
2
20 100 1 k
Frequency (Hz)
4 3
1 Reproduced frequency band
2 Slope adjustment
3 Cut-off frequency of the LPF
4 Cut-off frequency of the HPF
10 k