Switching Sound Muting/Attenuation; Adjusting Source Levels - Pioneer AVH-X8700BT Operation Manual

Chapter
21 Audio adjustments
4 Touch the following keys to adjust the
left/right speaker balance.
Moves towards the left.
Moves towards the right.
Each time you touch the keys, the left/right
speaker balance moves towards the left or
right.
p "Left25" to "Right25" is displayed as the
left/right speaker balance moves from the
left to right.
p The default setting is "L/R 0".
p You can also set the fader/balance by drag-
ging the point on the displayed table.
Switching sound muting/
attenuation
Sound from this system is automatically
muted or attenuated when a signal from
equipment with a mute function is received.
1 Press the HOME button to display the
Top menu screen.
2 Touch the following keys in the follow-
ing order.
The "Audio" screen appears.
3 Touch [Mute Level].
The pop-up menu appears.
4 Touch the item you want to set.
! ATT (default):
The volume becomes 1/10.
! Mute:
The volume becomes 0.
! Off:
The volume does not change.
112
Engb

Adjusting source levels

The SLA (source level adjustment) function ad-
justs the volume level of each source to pre-
vent radical changes in volume when
switching between sources.
p This function is available only when main
audio is available.
p Settings are based on the FM tuner volume
level, which remains unchanged.
p This function is not available when the FM
tuner is selected as the AV source.
1 Compare the FM tuner volume level
with the level of the source you want to
adjust.
2 Press the HOME button to display the
Top menu screen.
3 Touch the following keys in the follow-
ing order.
The "Audio" screen appears.
4 Touch [Source Level Adjuster].
The "Source Level Adjuster" screen appears.
5 Touch the following keys to adjust the
source volume.
Increases the source volume.
Decreases the source volume.
p If you directly touch the area where the cur-
sor can be moved, the SLA setting will be
changed to the value of the touched point.
p "+4" to "–4" is displayed as the source vo-
lume is increased or decreased.
p The default setting is "0".