Adding A Frame (Frame Composite) - Pentax Optio WG-1 User Manual Manual

OptioWG1_eng.book Page 204 Friday, March 11, 2011 4:10 PM

Adding a Frame (Frame Composite)

This function lets you add a decorative frame to still pictures. There are
6 frames already stored in the camera, 3 for each aspect ratio (4:3 and
16:9). You can copy the optional frames from the CD-ROM (S-SW117)
supplied with the camera.
The frame composite function cannot be used on the following images.
• Movies or images taken with F (Digital Panorama) or
modes
• Images that have recorded pixels of l, or m
An error message appears in step 4.
1
Enter the Q mode and use the four-way controller
(45) to choose the image to which you want to add a
frame.
2
5
Press the four-way controller (3).
The Playback Mode Palette appears.
3
Use the four-way controller
(2345) to select N (Frame
Composite).
4
Press the 4 button.
The 12-frame display of the frame selection screen appears.
5
Use the four-way controller
(2345) to choose a frame.
204
(Report)
Frame Composite
F o r c o m p o s i n g a n i m a g e
w i t h a f r a m e . S e l e c t O v e r -
w r i t e o r S a v e a s t o s a v e
Cancel
MENU
1 / 2
OK
OK
OK OK OK
OK OK OK