Table of Contents
Advertisement
• The red-eye compensation function can only be used with still pictures
taken with this camera.
• The red-eye compensation function cannot be used on panoramic
images, images taken with I (16-frame shooting) mode or on images
where red eyes cannot be detected on the camera. An error message
appears in Step 4.
Adding a Frame (Frame Composite)
This function lets you add a decorative frame to still pictures. There are
3 frames already stored in the camera.
1
Enter the Q mode and use the four-way controller (45)
to choose the image to which you want to add a frame.
2
Press the four-way controller (3).
The Playback Mode Palette appears.
3
Use the four-way controller
(2345) to select N (Frame
Composite).
4
Press the 4 button.
A 9-frame display of the frame selection screen appears.
5
Use the four-way controller (2345) to choose a
frame.
6
Turn the zoom lever to the right
(y).
The selected frame appears in single-image
display.
Downloaded From camera-usermanual.com
Frame Composite
Frame Composite
For composing an image
with a frame. Select Over-
write or Save as to save
Cancel
MENU
5
1/2
1/2
OK
OK
OK
OK
OK
163
Advertisement
Table of Contents
