Setting The Usb Connection Mode - Pentax Optio WG-1 User Manual Manual

OptioWG1_eng.book Page 263 Friday, March 11, 2011 4:10 PM

Setting the USB Connection Mode

Set the device to which the camera is connected with the USB cable.
Make sure to set the USB connection mode before connecting your
camera to the computer. You cannot perform the following setting if the
camera is already connected to your computer with the USB cable.
1
Turn your camera on.
2
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
3
Use the four-way controller (23) to select [USB
Connection].
4
Press the four-way controller (5).
A pull-down menu appears.
5
Use the four-way controller
(23) to select [MSC].
6
Press the 4 button.
The setting is saved.
7
Press the 3 button.
The camera returns to A mode or Q mode.
Proceed to the following pages depending on your computer.
Connecting to a Windows PC 1 p.265
Connecting to a Macintosh 1 p.274
Setting
2/4
Folder Name
Date
USB Connection MSC
Video Out PTP
HDMI Out Auto
Eye-Fi
Brightness Level
MENU Cancel OK OK
8
263