Changing The Video Output Format - Pentax Optio WG-1 User Manual Manual

OptioWG1_eng.book Page 244 Friday, March 11, 2011 4:10 PM
3
Use the four-way controller (2345) to select the
letter to enter, and press the 4 button.
The first letter is fixed and the cursor moves to the second letter.
4
Repeat step 3 and enter the remaining letters.
5
Press the four-way controller
(4) while "A" is selected, or
press (35) while "_" is
selected.
The frame moves to [Settings
complete].
6
Press the 4 button twice.
The folder name is fixed, and returns to the [W Setting] menu.
• You can move the cursor by pressing the zoom button.
• The name of the folder that was set is displayed in the [R Setting]
menu.

Changing the Video Output Format

7
When you connect the camera to AV equipment, choose the appropriate
video output format (NTSC or PAL) for taking and playing back images.
1
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
2
Use the four-way controller (23) to select [Video Out].
3
Press the four-way controller (5).
A pull-down menu appears.
244
Folder Name
A B C D E F G H I J K L M
N O P Q R S T U V W X Y Z
0 1 2 3 4 5 6 7 8 9
Settings complete
P A R T Y
Cancel
MENU
OK
OK