Treating With Silk'n Facefx For The First Time - Silk'n FaceFX DO105625B Instructions For Use Manual

Treating with Silk'n FaceFX for the First Time

The skin should be, clean, dry and free of any powder, gel or
cream.
If necessary a light oil based serum may be applied thinly to the
skin to help glide the device. Allow serum to absorb into the skin
before treating. See "cleaning the Silk'n FaceFX" section.
Remove Silk'n FaceFX
Press the
POWER ON/OFF SWITCH
INDICATOR LIGHT
be lit steadily.
Your FaceFX is ready for treatment.
Place the
TREATMENT SURFACE
automatically activate.
Apply light pressure while slowly moving the FaceFX
APPLICATOR in small circular motions. The
temperature will slowly increase.
Perform the treatment
for 5-7 minutes on each
area.
It is recommended to
apply a small amount of
a moisturizing cream on
the treated skin areas
after each session and
to massage it gently in
circular motions.
APPLICATOR
(I) will start blinking, and shortly afterwards will
from its package.
. The green
on your skin. The
READY/TREATMENT
light will
LED
TREATMENT SURFACE
11